CISCO TRANSLATION PROFILE FOR CALLER ID BLOCKING

I have created a Dial-peer for the Cisco UC500 or CME. A client had asked me how to disable Caller-ID on their Cisco UC540 phone system on a per call basis (not all the time and only for som

Read More


CISCO UC500 HOW TO SETUP RELAY ON EXCHANGE 2010

Set the UC540 to go to the IP address of your Microsoft Exchange 2010 server. This is done within the webpage at 10.1.10.1 or via command line at the IP address of the UC500 on the CUE side using the

Read More


MANUALLY INSTALL CISCO CME AND CUE ON UC500 OR CME

IOS and CME Reinstall The following process describes how to reformat the IOS Flash card and reinstall IOS and CME firmware to provide a known good baseline. This isn’t entirely necessary to res

Read More


SHOW HIDDEN PASSWORDS IN CISCO ASA OR ROUTER

Problem Once a pre-shared key is configured, it is encrypted, and you cannot see it in the running configuration. It is displayed as *******. Example: pixfirewall#show running-config </>Cryptoch

Read More


MANUALLY INSTALL CISCO CME AND CUE ON UC500 OR CME

IOS and CME Reinstall The following process describes how to reformat the IOS Flash card and reinstall IOS and CME firmware to provide a known good baseline. This isn’t entirely necessary to res

Read More